Last week we looked at different box mods for Stempod. As we mentioned most box mods will work but, the best choice for a box mod is one that has external batteries, and supports custom firmware. This firmware can be installed to the device to allow more features such as a longer draw limit, and even change the UI.
Not all box mods work with custom firmware. Check out our recommended list here. (Click to open page)A few of the custom firmwares include…
- arcticfox, tuboEvic, sur, myevic
Articfox is quite popular among the box mod community. It has been around a while and offers several different features. To install this on your device check below to see if your device is compatible, head over to this link for the install. Clicking the heading will take you to a document describing all the details. The following devices work with Articfox firmware…
- VTC Mini, VTC Dual, VTwo Mini, VTwo, AIO, Basic;
- Primo, Primo 2.0, Primo Mini, Primo Mini SE;
- eGrip II / Light;
- Cuboid, Cuboid Mini, Cuboid 200;
- Presa TC75W, Presa TC100W;
- RX75, RX200, RX200S, RX300, RX2/3, RXmini, RX GEN3, RX 20700, RX 21700;
- Sinuous P80, Predator;
- iStick TC100W, iStick TC200W, iStick QC 200W, iStick Power 80W, iStick Tria;
- Pico 75W, Pico Mega, Pico Dual, Pico RDTA, Pico 25, iStick Pico 21700;
- Aster, Elitar Pipe, iKonn220;
- Vaporflask: Classic, Lite, Stout;
- Beyondvape Centurion;
- La Petite Box;
- Vapor Shark SwitchBox RX;
TuboEvic & MyEvic
Clicking the heading will take you to the install page for TuboEvic or MyEvic. This works on the following devices.
- eVic VTC Mini
- eVic VTC Dual
- eVic VTwo Mini
- eVic VTwo
- eVic AIO
- eVic Basic
- eGrip II / Light
- Cuboid Mini
- Cuboid 200
- Presa TC75W
- Presa TC100W
- Reuleaux RX75
- Reuleaux RX200S
- Reuleaux RX2/3
- Reuleaux RXmini
- Reuleaux RX300
- Vaponaute La Petite Box
TuboEvic and MyEvic are the most popular among Stempod and 510 users. The added features such as extended heating time, UI changes, and even more. If you need more information, click the TuboEvic heading.
Sur firmware is a fork of myevic custom firmware. This firmware is quite similar to MyEvic but has a few different features. One of the coolest being the ability to save custom profiles to the device. These are great if you have different configs for different stems and want to be able to switch back and forth quickly.
For more info on custom firmware, check out https://www.evcigarettes.com/vape-help-guides-blog/hack-vape-mod-custom-firmware/
Both reddit and FuckCombustion are great resources if you are looking for even more tips and tricks. Check us out at /r/modpodlabs!
If you are looking to purchase a box mod, make sure it is compatible with one of these custom firmware so you can get the most out of your Stempod.
Thank you for reading. Please feel free to reach out to us at Dan@modpodlabs.com or on Instagram @modpod_labs with your feedback and suggestions. Be sure to follow us on Reddit!